Summary
- Imec has established baseline manufacturing flows for a silicon interposer platform within Europe's NanoIC semiconductor pilot line.
- The platform supports through-silicon vias, multiple routing layers, and microbump pitches down to 20 micrometres.
- A process design kit is scheduled for early 2027, with physical silicon prototyping remaining a longer-term objective.
Belgian semiconductor research organisation imec has established the baseline manufacturing flows for a silicon interposer platform under Europe’s NanoIC pilot line, preparing technology that could give smaller chip designers greater access to advanced semiconductor packaging.
Announced at SEMICON Europa on 10 November, the milestone provides the technical foundation for a process design kit expected in early 2027. Universities, startups, and companies designing chips without owning fabrication plants would be able to explore silicon interposer architectures using established electronic design automation software.
The platform is intended to support chiplet-based systems, which combine several specialised semiconductor dies within a single package. Such designs are increasingly important in AI computing, where processors, accelerators, and memory must exchange large volumes of information quickly without excessive energy consumption.
Imec’s latest work establishes a reference manufacturing process rather than an available commercial production service. The planned design kit will support virtual exploration, while the longer-term NanoIC programme aims to move towards physical demonstrators manufactured through the pilot line.
Connecting processors and memory
Conventional chip development often concentrates multiple functions within a single semiconductor die. As systems become more complex, however, combining specialised components can offer greater flexibility in manufacturing and system architecture.
A chiplet design might place several processing dies alongside high-bandwidth memory within a common package. Those components can be developed using different technologies, but their performance depends heavily on the connections carrying information between them.
Moving data consumes energy and takes time. When a powerful computing device repeatedly transfers information across inefficient connections, improvements to its processors may deliver limited benefits at system level.
Silicon interposers address part of this problem by providing a dense electrical routing layer beneath the components. Rather than relying exclusively on connections through a conventional circuit board, designers can use shorter and more closely spaced links between dies.
Imec’s reference platform incorporates through-silicon vias, multiple metal routing layers, and support for microbump pitches down to 20 micrometres. Through-silicon vias provide vertical electrical connections, while the routing layers distribute signals horizontally across the interposer.
The microbump pitch describes the spacing between electrical connections used to attach components. It does not refer to transistor dimensions or the manufacturing node of the processors placed within the package.
These characteristics support what is commonly described as 2.5D integration, in which multiple dies are positioned on an interposer rather than stacked directly on top of one another. The arrangement can provide dense communication links while preserving flexibility over the components selected for a particular system.
Design access comes before manufacturing
Advanced semiconductor packaging requires considerable manufacturing expertise, and designers must account for the constraints of the chosen process long before a device is fabricated.
A process design kit translates manufacturing rules into information that electronic design automation tools can use. Engineers can evaluate layouts, routing options, and technical constraints against a defined process without having to develop the underlying manufacturing technology themselves.
Imec plans to release an initial silicon interposer kit in early 2027 for use with established design environments from Cadence and Synopsys. It would allow organisations to examine different system architectures and develop an understanding of their likely requirements before the technology becomes available for physical prototyping.
That early access could be particularly useful to European research organisations and fabless semiconductor companies, which may have strong design capabilities but lack the capital required to establish specialised packaging facilities.
The kit will nevertheless represent an intermediate stage of technology development. Virtual design exploration can establish whether an architecture appears compatible with a particular manufacturing process, but it cannot independently demonstrate that the finished system will meet all its performance, reliability, and cost requirements.
Physical production introduces additional factors involving material behaviour, manufacturing variation, thermal management, and assembly yield. A design that performs well during simulation may still require changes when its electrical and mechanical characteristics are tested on manufactured hardware.
Imec’s roadmap therefore envisages increasingly mature design kits, followed by opportunities to produce physical silicon demonstrators through NanoIC. No date has been established for a general commercial manufacturing service using the new interposer platform.
Different packaging approaches serve different systems
The silicon interposer is one of three advanced interconnect technologies being developed within NanoIC, alongside fine-pitch redistribution-layer interposers and die-to-wafer hybrid bonding.
Redistribution-layer technology offers an alternative method of creating dense connections between components, potentially providing different manufacturing and cost characteristics. Hybrid bonding enables particularly close connections between semiconductor dies and can support highly integrated three-dimensional architectures.
These methods are complementary rather than interchangeable. An AI accelerator needing extensive communication between a processor and high-bandwidth memory may have different requirements from a smaller embedded system combining several specialised functions.
Choosing between the approaches involves trade-offs in connection density, electrical performance, heat dissipation, manufacturing complexity, and the expected volume of finished devices.
NanoIC already offers initial process design kits for fine-pitch redistribution-layer interposers and die-to-wafer hybrid bonding. Adding silicon interposer technology would broaden the range of architectures available for early evaluation.
That approach could help designers compare competing technical options before committing to an expensive development programme. The resulting decisions would still need to account for which manufacturing processes are sufficiently mature and what production capacity is realistically available.
Europe builds shared semiconductor capabilities
NanoIC forms part of the European Chips Act’s research and innovation infrastructure. The programme brings together capabilities from institutions in Belgium, France, Germany, Finland, Ireland, and Romania, supported through the Chips Joint Undertaking and participating national authorities.
The pilot line is designed to provide access to advanced semiconductor technologies and engineering expertise beyond the largest established chip manufacturers.
Expanding that access could support European companies developing specialised processors, automotive electronics, industrial computing systems, and other products that depend on complex semiconductor architectures.
Commercial success will still require suitable manufacturing partners, reliable supply chains, competitive costs, and customers prepared to adopt the resulting technology. A shared research platform can reduce some early development barriers without removing the substantial investment needed to bring advanced semiconductor products into production.
Imec’s new baseline processes give chip designers a defined technical foundation for silicon interposer development. The next milestone is the planned 2027 design kit, which will determine how readily researchers and fabless businesses can begin evaluating the technology within their existing engineering workflows.












